THE CLOCK

1. Hook up, plug in, connect to printer etc.

2. Turn on Machine

3. Flip Red Switch on Wall by Door.

4. Program:

1.Set up

2.Event Sequence(down)

3.User Defined(keypad)

4.View Edit(push 8 on keypad)

5.Number of Lengths (enter)

6.Gender(enter)

7.Age(enter)

8.Event(enter)

9.After Programming-Quit

10.Record Setup-Yes

11.Turn off-Turn back on

5. To send meet set-up directly to clock instead of programming:

1. From step 3 above User Defined 8 or 9

2. Delete

3. Get out of set-ups.

4. Go into Meet Manager

5. Timer

6. Download events

7. Choose User 8 or 9

8. Go back to Clock

9. User defined 8 or 9

10.Record Set-ups-Yes

6. Display Time of Day:

1.Scoreboard (enter)

2.Scbd Blank (enter)

3.Quit

7. During Races:

1.Scoreboard On

2.Delete Lanes Not Used

3.Combinations--Skip to Last Event

4.Store Print (after each race)

5.Reset

6.Yes on OK to Print (make sure printer on line)

7.Next Event or Next Heat

PROBLEMS:

Don't Hit Pad: -Plus Touch/Lane Number on numeric keypad/Enter-during race-or Finish Arm if on last lap. If pad does not turn off on finish turn, store print -say yes to warning box telling you lanes need to be checked.